×

Get Specifications

  • 8x Stations
  • 3x Print Heads
  • 3x High Density Flash Cure Units
  • Max Image Area 6" x 6" inch (15 cm x 15 cm)
  • Standard Pallet Size 4" Wide x 8 " Long (10 cm x 20 cm)
  • Standard Frame Size 9" x 14" (22 cm x 35 cm)

Power Requirements

  • 220 Volt
  • Single Phase
  • 25 amps

Air Requirements

  • Clean dry air
  • 90-110 psi
  • 3.63 cfm

Get Specifications

  • Air Consumption - 90-110 psi / 2.48 cfm
  • Diameter - 117 cm (46")
  • Elec. Requirements - 220v single phase 20amp
  • Max Frame Size - 35 cm x 50.80 cm (14" x 20")
  • Max Image Size - 30 cm x 30 cm (12" x 12")
  • Shipping Weight - 458 lbs.
  • Standard Pallet Size - 25.40 cm (10")
  • Stations - 6
  • Colors - 2
  • Flash Cures - 3

FORGOT YOUR DETAILS?

BASEBALL CAPS / HATS

CAPS

BASEBALL CAPS

Right now our industry is dominated by embroidery on hats, so here at ASPE we thought, what is we can print the tread instead of stitching it? Printing the designs directly onto the hat will allow you to have a lower cost per impression and will also greatly increase your production speeds.

In this video we are printing about 700 to a 1000 hats per hour, which far exceeds anything that you can ever do with embroidery machines. There are levers below the loading and the unloading station that allow you to easily secure or release the hat from the machine.

You can also notice that the machine will not print unless there is a hat present, that is becaus