×

LP1

LP2

LP3

LP4

LP2XL
Locate Dealer Build Your RapidTag Customization Talk to Engineer Contact Us

[su_button background="#ff6600" size="6" link="https://aspesite.com/get-pricing/"] GET A QUOTE [/su_button]
[su_button background="#ff6600" size="6" link= "https://aspesite.com/byrt/"] BUILD YOUR RAPID TAG [/su_button]

Specifications

  • 8x Stations
  • 3x Print Heads
  • 3x High Density Flash Cure Units
  • Max Image Area 6" x 6" inch (15 cm x 15 cm)
  • Standard Pallet Size 4" Wide x 8 " Long (10 cm x 20 cm)
  • Standard Frame Size 9" x 14" (22 cm x 35 cm)

Power Requirements

  • 220 Volt
  • Single Phase
  • 25 amps

Air Requirements

  • Clean dry air
  • 90-110 psi
  • 3.63 cfm

[su_button background="#ff6600" size="6" link="https://aspesite.com/get-pricing/"] GET A QUOTE [/su_button]
[su_button background="#ff6600" size="6" link= "https://aspesite.com/byrt/"] BUILD YOUR RAPID TAG [/su_button]

Specifications

  • Air Consumption - 90-110 psi / 2.48 cfm
  • Diameter - 117 cm (46")
  • Elec. Requirements - 220v single phase 20amp
  • Max Frame Size - 35 cm x 50.80 cm (14" x 20")
  • Max Image Size - 30 cm x 30 cm (12" x 12")
  • Shipping Weight - 458 lbs.
  • Standard Pallet Size - 25.40 cm (10")
  • Stations - 6
  • Colors - 2
  • Flash Cures - 3

[su_button background="#ff6600" size="6" link="https://aspesite.com/get-pricing/"] GET A QUOTE [/su_button]
[su_button background="#ff6600" size="6" link= "https://aspesite.com/byrt/"] BUILD YOUR RAPID TAG [/su_button]

FORGOT YOUR DETAILS?

  • Home
  • Can Coolers / Beverage Insulators
 

CAN COOLERS / BEVERAGE INSULATORS

CAN

FOAM CAN COOLERS

All Neoprene and foam can coolers are supposed to be the same size but are sewn in two different ways. This effects the loading the can cooler for printing. While foam and neoprene can coolers are advertised to be 4 inches wide, they have different pallet sizes. Usually the pallets are about 3.75 inches wide for a foam can cooler and about 3.5 inches for a neoprene coolers.

 

RapidTag (Rapid Tag) screen printing videos
RapidTag (Rapid Tag) screen printing can cooler
RapidTag (Rapid Tag) screen printing can cooler
CAN

NEOPRENE CAN COOLERS

All Neoprene and foam can coolers are supposed to be the same size but are sewn in two different ways. This effects the loading for can cooler printing. While foam and neoprene can coolers are advertised to be 4 inches wide, they have different pallet sizes. Usually the pallets are about 3.75 inches wide for a foam can cooler and about 3.5 inches for a neoprene can cooler.

RapidTag (Rapid Tag) screen printing videos
RapidTag (Rapid Tag) screen printing can cooler

SPECIFICATIONS TABLE

Substrate Neoprene & Foam
Speed 1000-2000 pcs per hour
Finish Appearance usually a 3 dimentional puff finish
Pallet Adhesive Not Needed for single color, it is needed for multi color printing
Mesh / Emulsion Lower mesh 110-160 / Liquid
Similar Application(s) Gloves, socks
Special Instructions Look at flipping machine with automatic unloader
TOP
Translate »