Caps/Hat Screen Printing Machine

Right now our industry is dominated by embroidery on hats, so here at ASPE we thought, what if we can print the tread instead of stitching it? Printing the designs directly onto the hat will allow you to have a lower cost per impression and will also greatly increase your production speeds.

SPECIFICATION

8x Station

2x Print Heads

2x High Density Flash Cure Units

Print Size 4 ″ X 3 ″ | 10 cm x 7.5 cm

Frame Size 5″ x 10″ | 12.5 cm x 25.4 cm

This frame is a special custom-made design.

KEY FEATURES

  • Dwell set up
  • Servo Indexer
  • Parts Counter
  • Adjustable stroke length
  • Squeegee Angle Adjustment
  • High-Density Flash Cure Units
  • Print Accuracy of .001″ | 0.02mm
  • Adjustable Stroke and flood speed
  • Parts Sensor (no product no print)
  • Pneumatic Screen Locks
  • Color Touch Screen
  • Index Speed Set up
  • Curing Time Set up
  • Stroke adjustment
  • Micro Registration

Product Videos

Hat Printing Machine | Custom Hats
Watch this video on YouTube.
Screen Print Hats Like A BOSS!
Watch this video on YouTube.
Decorating Hats / Caps 1000 Pieces Per Hour
Watch this video on YouTube.

In this video, we are printing about 700 to 1000 hats per hour, which far exceeds anything that you can ever do with embroidery machines. There are levers below the loading and the unloading station that allow you to easily secure or release the hat from the machine.
You can also notice that the machine will not print unless there is a hat present, that is because we have a parts present sensor to detect every hat in front of the print head. This means that if there is no hat in front of the print head, then the machine will not print on that pallet.

SPECIFICATION

10x Station

4x Print Heads

4x High Density Flash Cure Units

Print Size 4 ″ X 3 ″ | 10 cm x 7.5 cm

Frame Size 5″ x 10″ | 12.5 cm x 25.4 cm

This frame is a special custom-made design.

KEY FEATURES

  • Dwell set up
  • Servo Indexer
  • Parts Counter
  • Adjustable stroke length
  • Squeegee Angle Adjustment
  • High-Density Flash Cure Units
  • Print Accuracy of .001″ | 0.02mm
  • Adjustable Stroke and flood speed
  • Parts Sensor (no product no print)
  • Pneumatic Screen Locks
  • Color Touch Screen
  • Index Speed Set up
  • Curing Time Set up
  • Stroke adjustment
  • Micro Registration

REQUIREMENTS

POWER

220 Volt

Single Phase

35 amps

AIR

Clean Dry Air

90-110 PSI

6-8 Bar